Elegoo BiMetal nozzle 0.4 mm for Centauri Carbon
This is the original replacement nozzle for the Elegoo Centauri Carbon, in the BiMetal version and the standard 0.4 mm size. It's sold singly and, according to Elegoo, also fits the Centauri Carbon 2. A nozzle that clogs again and again, or extrudes a thinner line than normal even after cleaning, is usually worn or has burnt residue inside, and swapping it is quicker than cleaning it over and over.
- BiMetal nozzle, 0.4 mm, for 1.75 mm filament; one nozzle, part number 02.207.0055.
- For the Elegoo Centauri Carbon; Elegoo also lists the Centauri Carbon 2 for its set of four BiMetal nozzles.
- If the printer reports an extrusion abnormality or no filament comes out, check the extruder and the spool first: the nozzle isn't always to blame.
- Replace it following Elegoo's procedure for your printer.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Elegoo Centauri Carbon
- Elegoo Centauri Carbon 2
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion), No filament comes out.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Centauri Carbon 2: no filament coming out, clogged nozzle or errors 1243, 1263 or 1264
- Centauri Carbon: «Extrusion Abnormality» warning or no filament coming out
- Nozzle clogs or stops extruding mid-print (heat creep)
- Carbon or glass fibre filaments: they wear the nozzle, clog or snap
- Centauri Carbon 2 with CANVAS: filament will not load or unload (errors 1241, 1242, 1251 or 1265)
Technical data
- Brand
- ELEGOO
- Manufacturer part number
- 02.207.0055
- EAN
- 6932704911433
- Variant
- 0,4 mm
- Nozzle diameter
- 0,4 mm
- Filament diameter
- 1,75 mm
- Contents
- 1 pc
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Make sure your printer is a Centauri Carbon or Carbon 2 and that you pick 0.4 mm. Since it's sold singly, it's worth always keeping a spare.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.