Anycubic nozzles for Kobra 2, 3 Max, 4 and Kobra X
Anycubic sells the original nozzles for its Kobra printers on a single page with many variants: by printer model, by size and by material (brass, stainless steel or hardened steel). They fit the Kobra 2 family (Neo, Pro, Plus and Max), the Kobra 3 Max and 3 Max V2, the Kobra 4 and the Kobra X. When a nozzle keeps clogging or has worn, replacing it is usually quicker than cleaning it yet again.
- Genuine Anycubic nozzles in brass, stainless steel or hardened steel, depending on the variant.
- For the Kobra 2, 2 Neo, 2 Pro, 2 Plus and 2 Max, Kobra 3 Max and 3 Max V2, Kobra 4 and Kobra X.
- The page opens on the 0.25 mm brass nozzle for the Kobra X, Kobra 4 and Kobra 3 Max V2: change it if you need a different size.
- Brass for PLA, PETG and most filaments; hardened steel for fibre-filled ones; stainless steel sits in between.
- Swap it following the procedure in your Kobra's manual.
Where to buy it
Sold by Anycubic: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Anycubic (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Anycubic Kobra 2
- Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Pro
- Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Max
- Anycubic Kobra 3 Max
- Anycubic Kobra 4
- Anycubic Kobra X
- Anycubic Kobra 3 Max V2
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion), No filament comes out.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Kobra 3 or Kobra S1 with ACE Pro: error 11511, 11512 or 11518 (filament will not feed, will not retract or jams)
- Nozzle clogs or stops extruding mid-print (heat creep)
- Carbon or glass fibre filaments: they wear the nozzle, clog or snap
- The extruder clicks or skips
- Gaps in the top surface, in the walls or between infill and perimeters
Technical data
- Brand
- Anycubic
- Model
- Nozzle for FDM 3D Printers
- Linked variant
- Kobra X / Kobra 4 / Kobra 3 Max V2 - 0.25mm Brass Nozzle
- Shop
- Anycubic
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Before buying, check three things in the variant: your Kobra model, the size (0.4 mm is the usual one) and the material. For fibre-filled filaments, choose hardened steel.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.