Creality Unicorn nozzles for K1C and Ender 3 V3
Unicorn nozzles are Creality's quick-swap system: nozzle and heat break come as a single piece that you change without stripping the hotend. This kit has four, two 0.4 mm (the standard size) plus a 0.6 and a 0.8 mm for printing large parts faster. They fit the K1C, the Ender 3 V3 and the V3 Plus, and on the K1 or K1 Max only if your unit already has this type of integrated nozzle.
- 4 Unicorn quick-swap nozzles for 1.75 mm filament: 2 × 0.4 mm, 1 × 0.6 mm and 1 × 0.8 mm.
- For the Creality K1C, Ender 3 V3 and Ender 3 V3 Plus.
- On the K1 and K1 Max, only if your printer already has the integrated Unicorn-type nozzle, according to Creality.
- The 0.6 and 0.8 mm nozzles print large parts faster at the cost of detail; change the line width in the slicer too.
- To swap one, follow the procedure in your printer's manual and don't force the thread.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality K1C
- Creality Ender 3 V3
- Creality Ender 3 V3 Plus
- Creality K1
- Creality K1 Max
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, No filament comes out, Too little filament (under-extrusion).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- The K1 is not extruding: the gear spins or clicks (jam in the extruder or hotend)
- Nozzle clogs or stops extruding mid-print (heat creep)
- Carbon or glass fibre filaments: they wear the nozzle, clog or snap
- The extruder clicks or skips
- Gaps in the top surface, in the walls or between infill and perimeters
Technical data
- Brand
- Creality
- Model
- Unicorn Quick-Swap Nozzle Kit
- Manufacturer part number
- 4008030065
- EAN
- 6971636403357
- Nozzle type
- Unicorn QuickSwap
- Nozzle diameters
- 0,4 mm, 0,6 mm, 0,8 mm
- Filament diameter
- 1,75 mm
- Package contents
- 2 boquillas Unicorn 0,4 mm; 1 boquilla Unicorn 0,6 mm; 1 boquilla Unicornio 0,8 mm
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
If you own a K1 or K1 Max, check first whether your nozzle is the integrated Unicorn type, as not every unit has it. For everyday printing, the 0.4 mm nozzles are the ones you'll use most.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.