E3D MK8 brass nozzle 0.4 mm for Ender 3
MK8 is the nozzle format on many Creality and Elegoo bed-slingers, such as the Ender 3 family, the Ender 3 V2, the Ender 3 S1, the CR-10 or the Neptune 3. This is E3D's brass version in 0.4 mm, the size almost all of them come with. Keeping a spare means the printer doesn't sit idle when a nozzle clogs beyond saving or the orifice has worn.
- Brass, 0.4 mm orifice, for 1.75 mm filament; sold singly.
- According to the shop it fits the Creality Ender 2, Ender 3 (Pro, V2, Max, S1 and S1 Pro), Ender 5 and Ender 6, CR-10, Elegoo Neptune 3 (Pro, Plus and Max), Snapmaker J1 and several CraftBot and MakerBot models.
- MK8 and V6 nozzles look alike but are different parts: an MK8 won't work in a V6 hotend, nor the other way round.
- To swap it, heat the hotend, hold the heater block with one spanner and undo the nozzle with another; do the final tightening hot, as your manual says.
- It's the part for recurring clogs, uneven extrusion or a nozzle that has scraped the bed.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality Ender 3 V2
- Creality Ender 3 S1
- Creality Ender 3 S1 Pro
- Elegoo Neptune 3 Pro
- Creality Ender 3
- Creality Ender 3 Pro
- Elegoo Neptune 3
- Elegoo Neptune 3 Plus
- Elegoo Neptune 3 Max
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion), No filament comes out.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- E3D
- Manufacturer part number
- MK8-NOZZLE-0400
- Variant
- 0,4 mm
- Material
- brass
- Nozzle type
- MK8
- Nozzle diameter
- 0,4 mm
- Filament diameter
- 1,75 mm
- Contents
- 1 pc
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check your printer's manual or spare-parts list to confirm it uses MK8 nozzles: some newer Creality machines, such as the Ender 3 V3 or the K1C, use other formats. Stick with 0.4 mm unless you want to change size on purpose.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.