Micro-Swiss MK8 hardened steel nozzle 0.4 mm
Micro-Swiss makes this MK8 nozzle in hardened steel for anyone who wants to print abrasive filaments on a printer with an MK8 hotend, such as the Ender 3, the CR-10 or the Neptune 3. Carbon and glass fibre filaments sand the inside of a brass nozzle until the orifice widens and extrusion turns uneven; hardened steel resists that wear for far longer. You don't need it for plain PLA or PETG, but it does no harm if you add a few degrees.
- Hardened steel, 0.4 mm, 1.75 mm filament, part number M2585-04; sold singly.
- The shop lists a long range of MK8 printers: Creality Ender 2, 3, 5 and 6 (with their Pro, V2, Max, S1 and S1 Pro versions), CR-10, CR-6 SE and CR-10 Smart Pro, Elegoo Neptune 2S, X and 3, Artillery Hornet, or Snapmaker 2.0 and J1.
- It copes with what wears brass out: fibre-filled, metal-filled or glow-in-the-dark filaments.
- Steel passes heat on less well: add a few degrees and check the flow when you first use it.
- It's changed like any MK8: hotend hot, heater block held with one spanner and the nozzle turned with another.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality Ender 3 V2
- Creality Ender 3 S1
- Creality Ender 3 S1 Pro
- Elegoo Neptune 3 Pro
- Creality Ender 3
- Creality Ender 3 Pro
- Creality CR-10 Smart Pro
- Elegoo Neptune 3
- Elegoo Neptune 3 Plus
- Elegoo Neptune 3 Max
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- Micro-Swiss
- Manufacturer part number
- M2585-04
- EAN
- 7432114996970
- Variant
- 0,4 mm
- Material
- hardened steel
- Nozzle type
- MK8
- Nozzle diameter
- 0,4 mm
- Filament diameter
- 1,75 mm
- Contents
- 1 pc
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Confirm that your hotend takes MK8 nozzles rather than V6, Unicorn or a proprietary format. If you'll mostly print fibre-filled filament, check the PTFE tube and the extruder too, as they wear just the same.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.