Creality 4010 24 V fans for Ender 3
These are the two 40 × 40 × 10 mm, 24 V fans from the toolhead of the Ender 3 and Ender 3 Pro: the axial fan that cools the hotend heatsink and the blower that cools the print. The heatsink fan is the one that matters for clogs: if it slows or stops, heat creeps up the tube, the filament softens before it reaches the nozzle and the hotend jams mid-print (heat creep).
- Pair of 40 × 40 × 10 mm, 24 V fans: one axial (heatsink) and one blower (part cooling).
- If the heatsink fan doesn't spin at power-on, replace it before printing again: without it, clogs come quickly.
- Keep the original cable routing and airflow direction: the axial fan blows into the heatsink.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality Ender 3
- Creality Ender 3 Pro
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: A fan does not spin or is noisy, Clogged nozzle or hotend.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Nozzle clogs or stops extruding mid-print (heat creep)
- A fan isn't spinning: the hotend heatsink fan or the part cooling fan
- Carbon or glass fibre filaments: they wear the nozzle, clog or snap
- Silk PLA and PLA+: which temperature to use and why they lose shine, have weak layers or clog
- TPU and flexibles: they tangle in the extruder, jam in the tube or the multi-colour system, or string
Technical data
- Brand
- Creality
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Read the label on the fan you're replacing: it should say 4010 and 24 V. Other printers may use 12 V fans or other sizes, which are not interchangeable.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.