Bambu Lab complete hotend P1P/P1S, steel 0.4 mm
Bambu Lab's complete hotend for the P1 series comes with the whole assembly fitted: heater, thermistor, cooling fan and a hardened steel nozzle of 0.4 mm. It's the most direct way to get a P1P or P1S printing again after a clog that won't clear, a temperature fault or a hotend fan that won't spin, without diagnosing part by part. If you already know which part failed, some of them are also sold on their own.
- Module for the P1P and P1S with a hardened steel 0.4 mm nozzle, for 1.75 mm filament; part number FAH001-P.
- Includes two M3-14 shoulder screws for fitting.
- With the heater, thermistor and fan built in, it's the replacement for stubborn clogs, temperature errors or a failing hotend fan.
- The hardened steel nozzle handles fibre-filled filaments.
- Before replacing the whole module, try clearing the nozzle with Bambu Lab's guide: sometimes that's enough.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Bambu Lab P1P
- Bambu Lab P1S
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, No filament comes out, The hotend or the bed does not heat, Temperature error (MINTEMP, MAXTEMP, thermal runaway), A fan does not spin or is noisy.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Nozzle or bed temperature errors (HMS 0300-0200-… and 0300-0100-…)
- X1 and P1: clogged nozzle or hotend (0300-4006) and how to clear it
- The filament cutter gets stuck («The cutter is stuck») or fails to cut
- Fan error: hotend fan running slow (0300-0300-…) or part cooling fan stopped (0300-0400-0002-0001)
- X1 and P1: the extruder clicks, chews the filament or is clogged (cleaning and greasing)
Technical data
- Brand
- Bambu Lab
- Model
- Complete Hotend serie P1
- Manufacturer part number
- FAH001-P
- EAN
- 6975337031802
- Variant
- 0,4 mm - Hardened Steel
- Nozzle material
- hardened steel
- Nozzle diameter
- 0,4 mm
- Filament diameter
- 1,75 mm
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Make sure you own a P1P or P1S, and pick the 0.4 mm hardened steel variant. If only the temperature is failing, the ceramic heater with thermistor is a smaller replacement.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.