Bambu Lab heater and thermistor P1P/P1S (3-pack)
In the Bambu Lab P1P and P1S hotend, the ceramic heater and the thermistor come as one part that can be replaced without changing the whole hotend. This set contains three of them, plus three thermal pastes and three retaining clips, so you keep spares for next time. It's the part for a hotend that won't heat, heats slowly or throws temperature errors, once the cable and connector have been ruled out.
- Contents: 3 ceramic heaters with thermistor, 3 thermal pastes and 3 retaining clips; part number FAH001-CT.
- For the Bambu Lab P1P and P1S hotend.
- Use fresh thermal paste every time: without it, heating and temperature readings suffer.
- With a temperature error, check the toolhead connector and cable first.
- If there are also clogs or the hotend fan is failing, the complete P1 series hotend may be the better buy.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Bambu Lab P1P
- Bambu Lab P1S
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: The hotend or the bed does not heat, Temperature error (MINTEMP, MAXTEMP, thermal runaway).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- Bambu Lab
- Model
- Ceramic Heater & Thermistor (P1P, P1S)
- Manufacturer part number
- FAH001-CT
- EAN
- 6975337031581
- Contents
- 1 Set
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Make sure your printer is a P1P or P1S: the A1 heater is a different part. With three units in the set, keep the other two with their paste and clip for the next replacement.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.