Creality hotend kit for the Ender 3 V3 SE
This is the original replacement hotend for the Ender 3 V3 SE, supplied assembled with two copper-alloy nozzles: one 0.4 mm and one 0.6 mm. Swapping the whole unit makes sense when clogs keep coming back even after cleaning the nozzle, or when the hotend is slow to heat or throws temperature errors and the wiring is fine. The 0.6 mm nozzle also lets you print large parts faster when fine detail matters less.
- Assembled hotend for the Ender 3 V3 SE, with 0.4 and 0.6 mm copper-alloy nozzles.
- Only for the Ender 3 V3 SE: the Ender 3 V3 and V3 Plus use a different one (a ceramic hotend).
- If it won't heat, check the connector and cable first; if it clogs, try cleaning the nozzle: replacing the hotend is the last step.
- When fitting it, secure the cable and check it reaches temperature before printing; if your firmware allows it, run a PID tune.
Where to buy it
Sold by AliExpress: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at AliExpress (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality Ender 3 V3 SE
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, No filament comes out, The hotend or the bed does not heat, Temperature error (MINTEMP, MAXTEMP, thermal runaway).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Ender 3 V3 SE: nozzle or bed temperature too low or too high, or it restarts while heating
- Ender 3 V3 SE or KE: no filament comes out, the nozzle clogs or the extruder clicks
- Nozzle clogs or stops extruding mid-print (heat creep)
- The hotend or bed won't heat up, or takes too long
- Temperature error: Thermal runaway, MINTEMP, MAXTEMP or Heating failed
Technical data
- Brand
- Creality
- Model
- Ender-3 V3 SE Heater Block Kit
- Type
- Bloque Calefactado
- Variant
- Ender-3 V3 SE Hotend
- Origin
- CN
- Shop
- AliExpress
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check that your printer is exactly an Ender 3 V3 SE and choose that variant in the shop. If only the nozzle is damaged, replacing the nozzle rather than the whole unit may be enough.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.