3DJAKE ASA black 1.75 mm, 1 kg: outdoor filament
ASA is the filament to reach for when a part will live outdoors: it stands up to sunlight and weather far better than PLA, which softens and breaks down, and it yellows less than ABS. It prints much like ABS, with a hot nozzle and a hot bed, and like ABS it tends to warp and split between layers in a draught. This is the black version from 3DJAKE, the house brand of the European shop 3DJake, in 1.75 mm and 1 kg.
- Black ASA (RAL 9017), 1.75 mm, on a 1 kg spool.
- 3DJake gives 210–250 °C at the nozzle and 60–100 °C on the bed, so your printer has to reach those temperatures.
- An enclosed printer, or at least a spot with no draughts, considerably reduces lifted corners and cracks between layers.
- It smells while printing: use a ventilated room and keep it out of bedrooms.
- Suitable for the Bambu Lab AMS according to 3DJake, which adds a note (asterisk) worth reading.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
It works with printers that use this diameter and accept this material: check your printer's specifications.
Guides for printing with this material
What usually goes wrong with this material and how to fix it, in usi3d's troubleshooting guides:
- ABS and ASA: cracks between layers, parts that warp and a strong smell (enclosure and ventilation)
- ASA and ABS: smell and fumes when printing, carbon filter and ventilation without ruining the part
- ASA: the corners lift and the part comes off the bed mid-print
- How to store spools so they do not absorb moisture or tangle
Technical data
- Brand
- 3DJAKE
- Model
- ASA
- Manufacturer part number
- ASA-BLACK-1000-175
- EAN
- 9120099286435
- Variant
- 1,75 mm / 1000 g
- Material
- ASA
- Color
- Black
- RAL color
- RAL 9017
- Diameter
- 1,75 mm
- Net weight
- 1.000 g
- Nozzle temperature
- 210 - 250 °C
- Bed temperature
- 60 - 100 °C
- Format
- spool
- Compatibility
- Bambu Lab AMS*
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Choose ASA when the part will sit in the sun or outside; if you only need something tougher than PLA indoors, PETG is easier to print. Make sure your printer takes 1.75 mm, since the page also lists 2.85 mm.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.