3DJAKE ecoPLA black 1.75 mm, 1 kg: PLA filament
ecoPLA is the entry-level PLA from 3DJAKE, the in-house brand of the European shop 3DJake, here in black on a 1 kg spool of 1.75 mm filament. PLA is the easiest material to start with: it prints at low temperatures, barely warps and doesn't need an enclosure. A spool of plain PLA also works as a benchmark — if a print comes out fine with it, the problem was the other filament, not the printer.
- Black PLA (RAL 9017), 1.75 mm diameter, 1 kg of filament.
- Temperatures given by 3DJake: 195–215 °C at the nozzle; the bed can stay cold or go up to 60 °C.
- 3DJake says it can go in the Bambu Lab AMS, with an asterisk: read the shop's note before you load it.
- Good for everyday parts, prototypes and calibration prints; for outdoor use or parts that get warm, PETG or ASA are a better fit.
- If a fresh spool prints cleanly and an old one doesn't (stringing, popping, weak layers), suspect moisture in the old one.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
It works with printers that use this diameter and accept this material: check your printer's specifications.
Guides for printing with this material
What usually goes wrong with this material and how to fix it, in usi3d's troubleshooting guides:
- High-speed PLA: which temperature and flow to use so it does not come out with gaps or weak layers
- PLA in an enclosed printer: it clogs mid-print because the chamber gets too hot
- PLA turns brittle and snaps on the spool, in the tube or in the multi-colour system
- Silk PLA and PLA+: which temperature to use and why they lose shine, have weak layers or clog
- How to store spools so they do not absorb moisture or tangle
Technical data
- Brand
- 3DJAKE
- Model
- ecoPLA
- Manufacturer part number
- ECOPLA-BLACK-1000-175
- EAN
- 9120043486577
- Variant
- 1,75mm / 1000 g
- Material
- PLA
- Color
- Black
- RAL color
- RAL 9017
- Diameter
- 1,75 mm
- Net weight
- 1.000 g
- Nozzle temperature
- 195 - 215 °C
- Bed temperature
- 0 - 60 °C
- Format
- spool
- Compatibility
- Bambu Lab AMS*
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check that your printer takes 1.75 mm filament, as almost every current model does, and pick that size on the shop page, which also lists 2.85 mm. Start in the middle of the temperature range and fine-tune it with a temperature tower.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.