Soft, tacky or blurry resin prints

Any resin printer (3 guides)

• Loss of detail from wrong exposure (overexposure or underexposure)

  Fine details come out blurred or are lost: thick or merged letters, small holes filled in, lines thicker than they should be; or pillars, tips and thin areas are…

• Resin safety: gloves, glasses, ventilation and waste

  Liquid resin has got on your skin or splashed near your eyes, you feel itching or discomfort, or you do not know how to dispose of leftover resin, washing alcohol or…

• Sticky, soft parts or residue after washing and curing

  After washing and curing, the part is still sticky or soft, resin remains in holes and corners, or thin features deform or break after washing.

Anycubic (1 guide)

• Photon Mono M7 Pro: the exposure test fails or the LCD does not display the image properly

  On the Photon Mono M7 Pro nothing cures or prints come out soft or lacking detail, and in the exposure test the image seen on the LCD does not match the one on the…

Products that may help

Products from the usi3d shop that fit these guides, chosen for the fit and not for the commission. Check that they work with your printer before buying.

• ARNOMED black nitrile gloves, size M, 100-pack
• Anycubic Wash & Cure 3 Plus resin station
• Elegoo Mercury Plus V3.0 resin wash and cure
• EQM isopropyl alcohol 99.9%, 1 L

More “Resin” problems

• The resin print does not stick to the build plate
• The print sticks to the vat film (FEP)
• Layer separation or cracks in the resin print
• The resin print's supports fail
• The LCD screen or UV light does not light up
• Resin leak or torn film in the vat

Guides by brand

• Anycubic