Layer separation or cracks in the resin print
3 usi3d guides for “Layer separation or cracks in the resin print”, each with the likely causes, how to check which one is yours and the step-by-step fix, with each manufacturer's official sources.
They all apply to any resin printer, from any brand.
Each guide summarises the official documentation and says whether usi3d has already verified it on a machine.
Any resin printer (3 guides)
- Hollow or cup-shaped parts: suction effect and drain holes
Hollow or bowl-shaped parts get holes or ruptures in their walls, separated layers or parts that come loose; sometimes resin splashes when peeling or liquid resin stays…
- Separated layers, cracks or delamination
The part splits between layers, has horizontal cracks or layers peeling apart like sheets.
- The resin or the room is too cold
In the cold (in winter or in an unheated room) prints fail more often: parts do not stick, layers separate or parts come out incomplete, and the resin feels thick.
Products that may help
Products from the usi3d shop that fit these guides, chosen for the fit and not for the commission. Check that they work with your printer before buying.
More “Resin” problems
Can't find your case?
Tell usi3d's AI about your case: choose your printer, describe what you see and add photos if you like. It proposes checks step by step, with their sources.