EQM isopropyl alcohol 99.9%, 1 L
This is 99.9% isopropyl alcohol (isopropanol) in a 1 litre bottle, and in 3D printing it has two jobs: degreasing the build surface so the first layer grips again, and washing resin prints before curing. Pharmacy rubbing alcohol isn't the same, because its additives can leave a film on the bed.
- 99.9% isopropanol, 1 L bottle.
- On the bed: apply it with the plate cold and a lint-free cloth, and don't touch the surface with your fingers afterwards.
- With resin: wash the print wearing gloves in a closed container and let it evaporate before curing; alcohol with dissolved resin must not go down the drain.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
No specific printers have been listed. If in doubt, check your printer's manual before buying.
Problems it helps to fix
Symptoms it helps with: Does not stick to the bed, The resin print does not stick to the build plate, Soft, tacky or blurry resin prints.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- EQM
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
For bed cleaning a little goes a long way; the litre makes most sense if you wash resin prints. It's flammable: keep it closed, away from heat and children, and use it in a ventilated room.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.