Anycubic Wash & Cure 3 Plus resin station
Anycubic's Wash & Cure 3 Plus does both washing and curing in one machine: first it washes the part in a tub with a basket, then it cures it under UV light. The washing basket holds 7.6 litres and the curing space measures 220 × 260 mm, and according to Anycubic it's designed for printers with screens of up to 10.6 inches. Washing and curing with set times avoids tacky or soft prints.
- 7.6 L washing basket inside a 12 L tub, and UV curing in a φ 220 × 260 mm space.
- Designed for resin printers with screens up to 10.6 inches, according to Anycubic.
- Wash with isopropyl alcohol, or with water if your resin is water-washable, and never mix the two liquids.
- Let the part dry before curing it and don't overdo the curing time: an over-cured part becomes brittle.
- Alcohol with dissolved resin is hazardous waste: don't pour it down the drain.
Where to buy it
Sold by Anycubic: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Anycubic (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
No specific printers have been listed. If in doubt, check your printer's manual before buying.
Problems it helps to fix
Symptoms it helps with: Soft, tacky or blurry resin prints.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- Anycubic
- Model
- Wash & Cure 3 Plus
- Manufacturer part number
- WS3LA0WH+S020185-O
- UPC
- 665275592737
- Washing basket volume
- 7.6 litros
- Tank volume
- 12 litros
- Curing volume
- φ220*260 mm
- Screens up to
- 10.6 pulgadas
- Shop
- Anycubic
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check your printer's screen size: according to Anycubic, the station is designed for screens up to 10.6 inches. If your parts are small and you use a compact printer, a smaller station may be enough.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.