Elegoo Mercury Plus V3.0 resin wash and cure
Elegoo's Mercury Plus V3.0 combines in one machine the two steps every resin print needs after printing: washing, in a container with a basket, and UV curing on a turntable, which according to Elegoo cures through 360°. A poorly washed print stays tacky and a poorly cured one stays soft; doing both in the same station with set times gives more consistent results than doing it by hand.
- Washing in a container with basket and UV curing on a turntable; timer from 0 to 30 minutes.
- Curing volume of ∅ 250 × 290 mm and a washing basket for parts up to 214 × 135 × 180 mm with the build plate attached (230 × 135 × 260 mm without), according to the spec sheet.
- The lid blocks 99.9% of UV light, according to the spec sheet.
- Measures 302.5 × 302.5 × 412.5 mm and weighs 4.7 kg.
- Wash with isopropyl alcohol or the liquid your resin specifies, and let the part dry before curing it.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
No specific printers have been listed. If in doubt, check your printer's manual before buying.
Problems it helps to fix
Symptoms it helps with: Soft, tacky or blurry resin prints.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- ELEGOO
- Model
- Mercury Plus V3.0
- Manufacturer part number
- GWCZ-EL-3D-MPV3 (Elegoo EU) / 50.101.059300 (3DJake)
- EAN
- 6932704932742
- Dimensions
- 302,5 x 302,5 x 412,5 mm
- Weight
- 4,7 kilos
- Timer
- 0-30 minutos
- Curing volume
- ∅250 x 290 mm
- Power supply
- 100-240 V 50/60 Hz 24 V 2,5 A
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check that your parts, or your printer's build plate if you wash with it attached, fit in the basket. Don't cure for longer than needed: an over-cured part turns brittle.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.