Sovol SV08: 2 hardened steel nozzles, 0.4 mm
These are the original replacement nozzles for the Sovol SV08, in a set of two 0.4 mm nozzles. According to the spec sheet they combine titanium alloy, SKD11 hardened steel and copper alloy, and they suit everyday printing as well as abrasive filaments. Thermal conductive silicone for fitting is included.
- Set of 2 nozzles, 0.4 mm, for 1.75 mm filament, with thermal conductive silicone; part number 500101000018.
- For the Sovol SV08; the shop also lists the COMGROW T300.
- With two in the set, you keep a spare for the next clog.
- They handle abrasive filaments, such as those filled with carbon or glass fibre.
- Before swapping, check whether the clog is in the nozzle or higher up: an extruder spinning without feeding can also point to the drive gear.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Sovol SV08
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Carbon or glass fibre filaments: they wear the nozzle, clog or snap
- SV08: no filament comes out, the extruder spins without feeding or it clogs mid-print
- Nozzle clogs or stops extruding mid-print (heat creep)
- The extruder clicks or skips
- Gaps in the top surface, in the walls or between infill and perimeters
Technical data
- Brand
- Sovol
- Manufacturer part number
- 500101000018
- Nozzle diameter
- 0,4 mm
- Filament diameter
- 1,75 mm
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check that your printer is the SV08 (or the T300): other Sovol models use different nozzles. Apply the thermal silicone when fitting the new one and follow the procedure in Sovol's manual.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.