Sakata 3D PLA 850 grey 1.75 mm, 1 kg
Sakata 3D is a Spanish filament maker, and PLA 850 is one of its general-purpose PLAs, here in grey, 1.75 mm, on a 1 kg spool. It prints easily on any FDM printer, and Sakata publishes a fairly complete data sheet: temperatures, fan, layer height, maximum recommended speed and mechanical properties measured to ASTM standards.
- Grey PLA 850, 1.75 mm (± 0.05 mm, maximum ovality 0.05 mm), 1 kg spool.
- Nozzle at 205–220 °C; a heated bed isn't needed, though you can run it at 50–70 °C; part-cooling fan at 100%.
- Layer height from 0.1 to 0.3 mm and speeds up to 120 mm/s, according to the data sheet.
- Tensile strength of 50 MPa and elongation at break of 3.31% (ASTM D638 and D882), according to Sakata.
- Density of 1.24 g/cm³: with that figure your slicer works out accurately how much filament each print uses.
Where to buy it
Sold by PcComponentes: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at PcComponentes (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
It works with printers that use this diameter and accept this material: check your printer's specifications.
Guides for printing with this material
What usually goes wrong with this material and how to fix it, in usi3d's troubleshooting guides:
- High-speed PLA: which temperature and flow to use so it does not come out with gaps or weak layers
- PLA in an enclosed printer: it clogs mid-print because the chamber gets too hot
- PLA turns brittle and snaps on the spool, in the tube or in the multi-colour system
- Silk PLA and PLA+: which temperature to use and why they lose shine, have weak layers or clog
- How to store spools so they do not absorb moisture or tangle
Technical data
- Brand
- Sakata 3D
- Model
- PLA 850
- Manufacturer part number
- 403011
- EAN
- 8436618230034
- Material
- PLA 850
- Color
- Grey
- Diameter
- 1,75 mm ± 0,05
- Maximum ovality
- 0,05 mm
- Weight
- 1 kg
- Specific gravity
- 1,24 g/cm³ (ASTM D792)
- Tensile strength
- 50 MPa (ASTM D638)
- Tensile modulus
- 2.315 MPa (ASTM D638)
- Elongation at break
- 3.31 % (ASTM D882)
- Nozzle temperature
- 205-220 °C
- Bed temperature
- No es necesaria (50-70 °C opcional)
- Fan
- 100 %
- Layer height
- 0,1-0,3 mm
- Print speed
- <= 120 mm/s
- Shop
- PcComponentes
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Stick to the data sheet's speed limit if you have a fast printer: to print quicker, a PLA designed for high speed is the better choice. And make sure your machine runs 1.75 mm filament.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.