Elegoo Saturn 4 Ultra 16K resin 3D printer
The Saturn 4 Ultra 16K is an Elegoo resin printer with a 10-inch monochrome screen at 16K resolution: each pixel covers 14 × 19 microns, which means miniatures and parts with very fine detail. According to the brand it heats the resin, which helps in winter, when cold resin won't stick to the build plate and layers separate. The usable build volume is 211.68 × 118.37 × 220 mm.
- UV LCD resin printer with a 10-inch screen at 16K resolution (15120 × 6230 pixels, 14 × 19 µm).
- Build volume of 211.68 × 118.37 × 220 mm and a top speed of 150 mm/h, according to the spec sheet.
- Resin heating, according to Elegoo.
- Capacitive touch screen, USB and Wi-Fi.
- You'll also need isopropyl alcohol, gloves and a washing and curing station or an equivalent setup.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Troubleshooting guides for this printer
The faults of this printer covered by usi3d's guides, with the manufacturer's official sources:
- Saturn 4 Ultra 16K: the self-test fails (auto-leveling, mechanical sensor or resin tank not detected)
- Saturn 4 Ultra 16K: the camera shows nothing or the printer won't connect to Wi-Fi
- Saturn 4 Ultra 16K: cold resin or «Resin heating anomaly» message (heated resin tank)
- Saturn 4 Ultra 16K: replacing the PFA film of the resin tank, or the tank leaks resin
- Saturn 4 Ultra 16K: the LCD shows no image, a partial image, lines or dead pixels, and how to replace it
Technical data
- Brand
- ELEGOO
- Model
- Saturn 4 Ultra 16K
- Manufacturer part number
- GWCZ-EL-3D-S4U16 (Elegoo EU) / 50.101.038300 (3DJake)
- EAN
- 6932704932582
- Technology
- UV LCD
- Build volume
- 211,68 x 118,37 x 220 mm
- Dimensions
- 327,4 x 329,2 x 548 mm
- XY resolution
- 14 x 19 µm (15120 x 6230 px)
- Maximum speed
- 150 mm/hora
- Power supply
- 100-240 V 50/60 Hz 24 V 6 A
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Before buying, think about where it will go: resin smells and must be handled with gloves, so you need a ventilated spot out of children's reach. Measure the space: the printer takes up 327.4 × 329.2 × 548 mm.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.