Anycubic Kobra S1: fast multi-colour 3D printer
The Kobra S1 is Anycubic's high-speed printer. The brand's European store sells it on its own or as a Combo, which adds the four-colour feed system so you can print multi-colour parts without swapping spools by hand. It's for people who already print and want to go faster and, with the Combo, play with colour.
- High-speed FDM printer from Anycubic.
- Two versions in the shop: the printer alone (KBS1BK0A-O) or the Combo with the four-colour system (KS1CBK0A-O).
- Multi-colour printing uses up filament at every colour change (the purge): bear that in mind for parts with lots of changes.
- Anycubic sells genuine spares for it: hotend, extruder, magnetic build plate and fans.
- The page opens on the printer alone: pick the Combo if you want to print in several colours.
Where to buy it
Sold by Anycubic: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Anycubic (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Troubleshooting guides for this printer
The faults of this printer covered by usi3d's guides, with the manufacturer's official sources:
- Kobra S1: little or no filament comes out (hotend clog or error 11518)
- Kobra S1: noise from the Z axis, the rods or the print head while printing
- Kobra S1: won't connect to Wi-Fi, the cloud or the app, or the camera shows nothing (11402, 10105)
- Kobra S1 or Kobra 3: errors 10121, 10122, 10123 or 10124 (bed or printhead not heating, or thermistor fault)
- Kobra S1 or Kobra 3: a print head fan does not spin or is noisy (error 11950 on the S1)
Technical data
- Brand
- Anycubic
- Model
- Kobra S1
- Manufacturer part number (on its own)
- KBS1BK0A-O
- Manufacturer part number (combo)
- KS1CBK0A-O
- Linked variant
- Kobra S1
- Shop
- Anycubic
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
If you'll only print in one colour, the standalone version is enough; the Combo pays off if you want multi-colour parts or to switch materials without touching the spools. Check in the shop what each version includes before buying.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.