Elegoo 10 brass nozzles for Neptune 4 and 4 Pro
This Elegoo set contains ten original brass nozzles for the Neptune 4 and 4 Pro in four sizes, plus four cleaning needles and the spanner to change them. With four 0.4 mm nozzles, the standard size, you have spares for several clogs, and the 0.2, 0.6 and 0.8 mm ones let you try finer detail or more speed. As with the toolhead, there's a version for series A and one for series B machines.
- 10 brass nozzles for 1.75 mm filament: 2 × 0.2 mm, 4 × 0.4 mm, 2 × 0.6 mm and 2 × 0.8 mm.
- Includes 4 cleaning needles and 1 nozzle spanner.
- For the Elegoo Neptune 4 and Neptune 4 Pro, in a version for series A or series B machines.
- The 0.2 mm nozzle gives more detail but clogs more easily; the 0.6 and 0.8 mm ones print large parts faster.
- When you change size, update the nozzle diameter and line width in your slicer.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Elegoo Neptune 4
- Elegoo Neptune 4 Pro
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Clogged nozzle or hotend, Too little filament (under-extrusion), No filament comes out.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- ELEGOO
- Model
- Multi-Size Brass Nozzle Kit for Neptune 4/4 Pro (serie A)
- Manufacturer part number
- 50.204.0060 (3DJake) / GWCZ-EL-3D-N404 (Elegoo EU, Ribbon-Cable)
- Variant
- A-Serie
- Material
- brass
- Filament diameter
- 1,75 mm
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Choose the version for your printer's series (A or B) in the shop, just as with the toolhead: according to the shop, series B machines have a “B” in the serial number. For repeated clogs, try a fresh 0.4 mm nozzle before touching the rest of the hotend.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.