Anycubic magnetic spring steel plate for Kobra
This is the original flexible, magnetic spring steel plate for Anycubic's Kobra printers: you lift it off the bed, flex it slightly and the print pops off. With use the surface wears or gets scratched, and once prints stop sticking even after cleaning the plate, it's time for a new one. Each Kobra has its own size and thickness, so choosing the right variant is what matters.
- Flexible magnetic spring steel plate, genuine Anycubic; the page opens on the Kobra S1 variant.
- Sizes by model: Kobra S1, 276 × 264 mm and 0.4 mm; Kobra 3, 268 × 256 mm and 0.7 mm; Kobra 3 Max, 430 × 429 mm and 0.6 mm; Kobra 2 Plus, 330 × 340 mm and 0.5 mm.
- For the Kobra S1, Kobra 3 and 3 V2, Kobra 3 Max and 3 Max V2, Kobra 2 Neo and Kobra 2 Plus, among others on the shop's list.
- Remove prints with the plate cold by flexing it slightly; don't use metal scrapers on the surface.
- Clean it with isopropyl alcohol and, now and then, with soap and water.
Where to buy it
Sold by Anycubic: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Anycubic (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Anycubic Kobra S1
- Anycubic Kobra 3
- Anycubic Kobra 3 V2
- Anycubic Kobra 3 Max
- Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Plus
- Anycubic Kobra 3 Max V2
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Does not stick to the bed, The print will not come off the bed.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- Anycubic
- Model
- Spring Steel Magnetic Platform
- Linked variant
- Kobra S1/ Kobra S1 Combo
- Size (Kobra S1)
- 276*264mm, 0.4mm
- Size (Kobra 3)
- 268*256mm, 0.7mm
- Size (Kobra 3 Max)
- 430*429mm, 0.6mm
- Size (Kobra 2 Plus)
- 330*340mm, 0.5mm
- Shop
- Anycubic
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Choose your Kobra's variant in the shop: each model has a different size and thickness, and another model's plate won't fit. After swapping it, check the levelling and the Z offset.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.