3DJAKE textured PEI plate, dual-sided, 235 × 235
This is a flexible sheet with textured PEI on both faces plus its magnetic base, for printers with a 235 × 235 mm bed — the Ender 3 and Ender 3 V2, for example, or the Neptune 3 and 4. Textured PEI holds PLA and PETG well while the bed is hot and lets go as it cools; if a print resists, a slight flex of the sheet frees it. Two sides mean you have a spare surface for when the first gets scratched or loses grip.
- Flexible 235 × 235 mm sheet, textured PEI on both sides, with a magnetic base.
- For PLA, PETG, ABS, PC, TPU, nylon or carbon-fibre PLA, according to 3DJake.
- Fits 235 × 235 mm beds: Creality Ender 3, Ender 3 Pro, V2, S1, S1 Pro, V3 SE and V3 KE, K1, and Elegoo Neptune 3, 3 Pro, 4 and 4 Pro.
- The texture leaves the underside of the print with a grainy, matte finish.
- Clean it with isopropyl alcohol and keep your fingers off it: skin grease is a common reason a first layer won't stick.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Creality Ender 3 V2
- Creality Ender 3 S1
- Creality Ender 3 S1 Pro
- Creality Ender 3 V3 SE
- Creality Ender 3 V3 KE
- Creality K1
- Elegoo Neptune 3 Pro
- Elegoo Neptune 4
- Elegoo Neptune 4 Pro
- Creality Ender 3
- Creality Ender 3 Pro
- Elegoo Neptune 3
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: Does not stick to the bed, The print will not come off the bed.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Ender 3 S1 Pro or Ender 5 S1: first layer too high or scraping after levelling (CR Touch and Z offset)
- Neptune 4 and 4 Pro: plastic blob on the hotend (blob of death) or leaks around the nozzle
- Supports that fall over, break or won't come off
- The part is stuck so hard to the bed it won't come off
- First layer won't stick to the bed
Technical data
- Brand
- 3DJAKE
- Model
- Textured PEI Build Plate - Dual Sided
- Manufacturer part number
- PDSBP-235X235
- EAN
- 9010707008101
- Variant
- 235 x 235 mm
- Surface
- PEI texturizado, dos caras
- Contents
- 1 pc
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Measure your bed before buying: the printer list on the shop page lumps together every plate size it sells, and this is the 235 × 235 mm one. After fitting it, re-level and adjust the Z offset, because the base and sheet change the height of the print surface.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.