Anycubic nFEP or ACF vat film for Photon printers
In a resin printer's vat, the bottom film lets the light through and every layer peels away from it; with use it gets scratched, loses clarity or is punctured. Anycubic sells original replacement films for its Photon printers in two types, nFEP and ACF, depending on the model. What matters is choosing the one for your printer, because each has its own size and thickness.
- Replacement nFEP or ACF films, in packs of 2 or 5, for Anycubic Photon vats.
- The variant the page opens on is nFEP for the Photon P1 Max: 10.1 inches, 0.15 mm thick and 95% transmittance.
- For the Photon Mono M7 Max there's an ACF film of 13.6 inches and 0.3 mm, with 90% transmittance.
- They fit, among others, the Photon P1, P1 Max, Mono M7, M7 Pro, M7 Max, M5, M5s, M5s Pro, Mono 4, Mono 4 Ultra, Mono 2 and M3 Max.
- A cloudy, scratched or punctured film is done; and if prints stick to it, check exposure and levelling first.
Where to buy it
Sold by Anycubic: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Anycubic (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Anycubic Photon P1
- Anycubic Photon P1 Max
- Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono M5s
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: The print sticks to the vat film (FEP), Resin leak or torn film in the vat.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Photon Mono M7 Pro: replacing the ACF film (bumps, cured resin, leaks or code 305)
- Photon Mono M7 Pro or M7 Max: warnings about residue in the vat, not enough resin, or model fell off/incomplete
- Cured resin debris floating in the vat
- Photon Mono M7 Pro: the print does not stick to the build plate or leveling fails (code 303)
- Resin leak or torn film in the vat
Technical data
- Brand
- Anycubic
- Model
- Release Film for Photon Series
- Linked variant
- Photon P1 Max / NFEP Film / 2 Pcs (S020335)
- Linked variant data
- NFEP, 10.1 inch, 0.15mm, transmitancia 95%
- Types
- NFEP, ACF (M7 Max: 13.6 inch, 0.3mm, 90%)
- Shop
- Anycubic
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Find the exact variant for your printer in the shop: film type (nFEP or ACF), size and thickness change from one model to another. Choose the pack size too: five films keep you supplied for longer.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.