Elegoo PFA film for Saturn 4, Ultra and 16K (5-pack)
The film at the bottom of the vat is a consumable on any resin printer: every layer peels off it, and with use it gets scratched, cloudy or punctured. This pack contains five original Elegoo PFA films for the Saturn range, a material that, according to Elegoo, releases better than classic FEP. Replace it when it loses transparency, shows marks or lets resin through, or when prints start sticking to the bottom.
- 5 PFA films for the vat; part number 50.102.0026.
- For the Elegoo Saturn 4, Saturn 4 Ultra and Saturn 4 Ultra 16K, as well as the Saturn 2 and Saturn 3; the shop lists more Elegoo models.
- When fitting it, keep the film taut and wrinkle-free, tighten the screws in a criss-cross pattern and check for leaks before filling the vat.
- To remove residue from the film, never use metal tools: use a plastic scraper.
- A print stuck to the film can also come from exposure or levelling: check those before replacing it.
Where to buy it
Sold by 3DJake: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at 3DJake (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
- Elegoo Saturn 4
- Elegoo Saturn 4 Ultra
- Elegoo Saturn 4 Ultra 16K
- Elegoo Saturn 2
- Elegoo Saturn 3
Check at the shop that the variant you choose (model, size or connector) matches your printer before you buy it.
Problems it helps to fix
Symptoms it helps with: The print sticks to the vat film (FEP), Resin leak or torn film in the vat.
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- ELEGOO
- Model
- PFA Film (5 uds.)
- Manufacturer part number
- 50.102.0026 (3DJake) / GWCZ-EL-3D-310 (Elegoo EU)
- EAN
- 6976021763825
- Variant
- Saturn 4/Ultra/16K
- Contents
- 5 unidades
- Material
- PFA
- Shop
- 3DJake
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Check your printer model: the shop's “Saturn 4/Ultra/16K” variant is the same part for every Saturn on its list. Five films will keep you going for a long time.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.