Spurtar feeler gauges, 32 blades 0.03–1 mm
A set of 32 steel feeler gauges, from 0.03 to 1.00 mm, for setting the gap between nozzle and bed to an exact thickness instead of relying on a sheet of paper. With paper, the reading changes with the paper and how hard you press; with a gauge, the gap is always the same and the first layer comes out more consistent from one print to the next.
- 32 steel blades, each marked with its thickness, from 0.03 to 1.00 mm.
- Level with the bed and nozzle hot and the nozzle clean: a blob of plastic on the tip throws the reading off.
- Some manuals ask you to check nozzle height with a specific gauge: use the one yours specifies.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
No specific printers have been listed. If in doubt, check your printer's manual before buying.
Problems it helps to fix
Symptoms it helps with: Unlevel or warped bed, Uneven first layer (thin and thick areas).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
Technical data
- Brand
- Spurtar
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
If your printer levels itself, a gauge is for checking the Z offset or nozzle height; if you level by hand, pick one blade and use it at all four corners every time. Wipe the blades free of oil before bringing them near the plate.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.