Creality Space Pi V2 Plus: two-spool filament dryer
The Space Pi V2 Plus is Creality's filament dryer for two spools at once: it keeps them warm, from 45 to 75 °C, to drive out the moisture they pick up from the air. At 75 °C it reaches temperatures that are useful for materials such as nylon or PETG, and it has 12 presets by filament type so you don't have to look them up. Moisture shows up as popping and bubbles when extruding, more stringing, layers that come apart and filament that snaps inside multi-colour systems. This is the 220–240 V version sold in Europe.
- Two spools at once, with a drying temperature from 45 to 75 °C.
- 12 presets by filament type and an adjustable timer.
- Takes spools up to 190 mm in diameter and 150 mm wide, with 1.75 or 2.85 mm filament, according to the spec sheet.
- Runs on 220–240 V and draws 160 W; measures 186 × 301 × 278 mm.
- PLA only needs a low setting; keep the high ones for nylon or PETG and don't exceed what the spool can take.
Where to buy it
Sold by Amazon.es: on its website you see the final price, shipping, returns and warranty, and you pay there. usi3d does not sell it or take payment for it.
Link to the shop
View at Amazon.es (opens in a new tab)
See price at the shop · VAT included, shipping set by the shop
If you buy through these links, usi3d may earn a commission from the shop; it costs you nothing extra. How we choose
Which printers it fits
No specific printers have been listed. If in doubt, check your printer's manual before buying.
Problems it helps to fix
Symptoms it helps with: Strings between parts (stringing), Blobs and zits on the surface, Layers split apart (delamination), Too little filament (under-extrusion), The multi-material system fails (does not load, cut or jams).
usi3d's troubleshooting guides with the symptoms it helps with and its printers:
- Wet filament: how to spot it and dry it
- How to store spools so they do not absorb moisture or tangle
- Nylon (PA): bubbles, stringing and weak layers from moisture, or parts that warp
- PETG: stringing, plastic stuck to the nozzle and parts that grip the plate too hard
- Silk PLA and PLA+: which temperature to use and why they lose shine, have weak layers or clog
Technical data
- Brand
- Creality
- Model
- Space Pi Filament Dryer V2 Plus
- Manufacturer part number
- 4005010153
- Drying temperature
- 45-75 °C
- Spools
- 2
- Timer
- 1-45 h
- Dimensions
- 186 x 301 x 278 mm
- Weight
- approx. 1900 g
- Power
- 160 W
- Power supply
- 220-240 V ~50/60 Hz
- Filament diameter
- 1,75 mm, 2,85 mm
- Shop
- Amazon.es
From the manufacturer or the shop; they may vary by variant.
How to choose the right one
Measure your spools before buying: according to the spec sheet it takes spools up to 190 mm across, and some 1 kg spools are slightly bigger. If you only dry a spool now and then, a single-spool dryer may be enough.
How we choose products
usi3d shows products from other shops for their compatibility with your printer, because they help with a fault, because they ship to Spain and because the shop is trustworthy. The commission does not decide what we show or in what order.