Noise or rubbing when the axes move
9 usi3d guides for “Noise or rubbing when the axes move”, each with the likely causes, how to check which one is yours and the step-by-step fix, with each manufacturer's official sources.
4 apply to any FDM printer and 5 are for Anycubic, Bambu Lab, Creality, Elegoo and Voron printers.
Each guide summarises the official documentation and says whether usi3d has already verified it on a machine.
Any FDM printer (4 guides)
- Bands or jumps that repeat up the height of the part: lead screw, coupler and Z axis
Bands, marked horizontal lines or small steps appear on the walls of the part and repeat along its height, sometimes every few millimetres; or the Z axis rises in jerks…
- Loose pulleys or grub screws: shifted layers, play and noises in the axes
Layers shift like a staircase in X or Y, you feel play when moving the toolhead or the bed with the motor still, the belt runs crooked or an axis makes a strange noise…
- Lubricating lead screws, rods and rails: with what, how often and where not to put it
The axes squeak or sound dry, the toolhead or the bed moves with more resistance than before, the Z axis is noisy going up or layer marks start to appear; or maintenance…
- Squeaks, grinding or vibration when the axes move
The printer is louder than before when it moves: squeaking, rubbing, rattling or vibration, sometimes only on one axis or with certain moves.
Anycubic (1 guide)
- Kobra S1: noise from the Z axis, the rods or the print head while printing
The Kobra S1 makes noise when the Z axis moves, the print head catches or drags as it moves, there is a rubbing sound at the top while printing, or it is very loud while…
Bambu Lab (1 guide)
- Noise or friction on the axes: cleaning and lubricating rods, lead screws and pulleys (X1, P1 and A1)
The printer squeaks or makes noise when the toolhead or bed moves, the Z axis moves jerkily, marks or vibration appear on the walls after a lot of ABS or ASA printing…
Creality (1 guide)
- Ender 3 V3 SE: noise or stuttering on the X or Y axis, from a motor or from a fan
The Ender 3 V3 SE makes an odd noise when the X or Y axis moves, a motor makes noise while printing, an axis stutters at one spot (sometimes with a noise) or a fan does…
Elegoo (1 guide)
- Centauri Carbon 2: unusual noise or vibration when printing, moving or homing
The Centauri Carbon 2 makes an abnormal noise or vibrates while printing, during idle moves or while homing.
Voron (1 guide)
- Voron Trident and 2.4: A/B belts loose, too tight or uneven
On a Voron Trident or 2.4 (CoreXY), the A and B belts have lost tension, are too tight or have different tensions.
Products that may help
Products from the usi3d shop that fit these guides, chosen for the fit and not for the commission. Check that they work with your printer before buying.
More “Mechanics” problems
Guides by brand
Can't find your case?
Tell usi3d's AI about your case: choose your printer, describe what you see and add photos if you like. It proposes checks step by step, with their sources.