Snapmaker 3D printer troubleshooting
3 guides to fix Snapmaker 3D printers: the symptom, the likely causes, how to check which one is yours and the step-by-step fix, with official sources from Snapmaker.
Printers covered: 2.0 A350T, Artisan and J1s.
Each guide summarises the official documentation and says whether usi3d has already verified it on a machine.
Extrusion (1 guide)
- J1/J1s: the two print heads do not line up or bed calibration fails
On a Snapmaker J1 or J1s, the layers of the two materials are shifted relative to each other, or calibration fails: the bed keeps rising and the nozzle presses into it…
Electronics (1 guide)
- Artisan: errors 13-12, 13-17, 13-18, 13-13 or 13-15 on the dual extrusion module
On the Snapmaker Artisan the print pauses and the screen shows 13-17 or 13-18 (the extruder is continuously pulled up) or 13-12 (the calibration sensor is abnormally…
Error codes and messages (1 guide)
- Snapmaker 2.0: the touchscreen does not detect the 3D printing module or any toolhead
After swapping modules, the Snapmaker 2.0 touchscreen does not recognise the 3D printing module, or none of the toolheads (3D printing, laser or CNC).
Symptoms in the Snapmaker guides
Other brands
Can't find your case?
Tell usi3d's AI about your case: choose your printer, describe what you see and add photos if you like. It proposes checks step by step, with their sources.